In this list you can find new KNX products that have been brought to the market.
The modular software system Sheet4Q is the solution for bringing together heterogeneous KNX networks. The bus access works via KNXnet/IP. The data is exchanged via MQTT. This is optionally also possible over the cloud in end-to-end encrypted form and allows connection across several locations. Configuration using spreadsheets enables efficient and convenient setup through the use of formulas and macros. Data packets can be filtered, converted and linked in a simple and fast way. Sheet4Q can be supplemented with further modules for systems from building and industrial automation.
ABB now has a comprehensive range of DALI Gateways among its ABB i-bus® KNX lighting control products. Of particular note are the DALI Gateways Premium DG/S 220.127.116.11 and DG/S 18.104.22.168. The DALI Gateways Premium now include special functions such as tunable white, human centric lighting (HCL) or dim2warm. Basic and Premium versions comply to the new DALI2 standard which increases the compatibility between all DALI devices. All DALI devices received improved commissioning with the ABB i-bus® tool extension.
Switch actuators are the essential component in a KNX system for switching and controlling loads by turning circuits on or off. To provide support for the wide KNX portfolio, ABB provides an innovative service and commissioning tool, the ABB i-bus® tool. The tool provides system integrators with improved device supervision, faster commissioning and maintenance and comprehensive energy management. The integration of the new switch actuators into the ABB i-bus® tool will also provide system integrators with a quick and easy overview of device status, activated device functions and parameter settings during the commissioning of KNX installations.
Integrate your air-to-water unit into KNX with the simplest communication interface. Thanks to its compatibility with ETS5 software, you can easily configure Aidoo and control all the unit’s features using any other device connected to the KNX system. Aidoo Air-to-Water by Airzone for KNX systems ensures the highest standards of quality and efficiency in projects. We have worked with the industry’s leading manufacturers to design the most efficient interfaces using their protocols. Our expertise in control solutions has enabled us to create our newest product, Aidoo KNX Air-to-Water. Direct connection with the unit. Full 2-way communication with confirmed status and commands. Aidoo KNX communicates with manufacturer-specific protocols.
The Lebensräume Configurator (Awarded with the KNX Award 2022) and Terminal® are web-based planning tools for electrical installations. Both tools allow you to plan KNX projects. The graphical user interface of the Lebensräume Configurator is design-oriented, as it is geared towards the use of end customers. Terminal, on the other hand, has a technical tabular structure and is available to you for detailed planning. Together, the tools offer you planning security - both in the first consultation, where you can already make a binding price statement, and in the further detailed planning. The project is handed over digitally and via standardized interfaces.
The EisBaer Home Energy Management System (HEMS) offers a KNX solution to efficiently distribute, store and use energy. The HEMS controls the distribution of the electricity it produces. All producers (e.g. the photovoltaic system) and consumers (heat pump, electric car, solar power storage, household appliances, etc.) are coordinated by the intelligent EisBaer algorithms with solar forecast and current electricity prices and executed by the intelligent KNX technology in such a way that electricity costs are minimised and independence from the energy supplier is increased. The EisBaer HEMS controller also visualises data from solar power systems, storage batteries, electricity, gas and water supplies for a better overview and control of energy generation and consumption.
The MECps640 is the first KNX line coupler that has a 640 mA PSU integrated to power its connected subline. Moreover, this special coupler is the same size as standard line couplers. One device instead of two devices per subline – only 2 units of space on the DIN rail – more compact KNX projects. This makes the MECps640 perfect to use for extending existing installations. Especially when available space in the distribution cabinet is rather limited. Furthermore, installers that use the MECps640 instead of other line couplers have less effort when considering storage, transport and cabling. The MECps640 has all the common features and functionalities of the Apricum MEC coupler series.
With an ultrasonic or hydrostatic sensor, the SK80-F measu-ring system captures the filling and water levels in water cisterns or oil tanks of different shapes. The measurement of the filling and water levels is based on a runtime measurement of the ultrasonic impulses. The hydrostatic sensor captures the pressure of the water column above it and calculates the level from it. The conversion of levels into content takes place internally based on the entered tank geometry. Tank parameters can be entered on the device on-site. Alternatively, all values can be parameterised in the ETS. The current measured values are available in the KNX bus and are shown locally on the display.
This KNX presence detector OS-464i-KNX contains both a PIR motion sensor and a brightness sensor. It provides a 360° detection angle and a wide detection range of up to 30 metres diameter, and it can handle all ceiling installation situations, including spring clips, flush mounting and surface mounting with one product. The control parameters such as lux, time, sensitivity, standby light illumination value and standby time are not only configurable by ETS, but can also be made fast and easy through its associated IR-11KNX remote control.
B3 International’s KNX cable C1220 (also known as TP1 in the KNX world) is made up of two twisted pairs of solid, bare copper conductors with an overall PET tape followed by an aluminium foil screen with a tinned copper drain wire in longitudinal contact with the foil and oversheathed with a green LSZH jacket, compliant to IEC 60332-3-24, IEC 60754-1/2 and IEC 61034. The product shows excellent headroom figures on capacitance, resistance and on attenuation figures. The cable is tested and compliant for use in KNX systems.
With the new updates in the KNXtool APP, it has never been easier to work with ETS functions. When you are planning the KNX project in the web application, you can automatically create ETS functions and KNX group addresses. These functions are then imported into ETS in the building view, which makes KNX programming much easier and faster. The KNXtool APP colour codes change for group addresses and functions to visually verify if they have changed and lets you update only selected parts. It even shows you the used group addresses and prevents you from updating any group addresses that are already linked to an object.
DS202020 is a KNX web server for local and remote control via iOS/Android apps of a KNX installation, with SIP support which allows it to act as an intercom, offering also call forwarding to mobiles when connected to a network with a third-party SIP outdoor unit. This is the DIN rail version of the VIIP screen series, and it includes different network adapters: Wi-Fi and Ethernet besides the native connection to KNX. It is possible to visualise KNX projects on tablets and/or smartphones by plans or by rooms (fully editable by the user), and also special visualisation for laptops. It also supports scenarios, yearly timings, technical alarms and push notifications as well as scripting support for advanced programmers.
VIIP7 is an all-in-one KNX touch screen with a web server embedded for remote control via iOS/Android apps, and also with SIP support which allows the screen to also act as a video intercom, offering call forwarding to mobiles when connected to a network with a third-party SIP outdoor unit. It has a 7.1” TFT, and is available in different hardware versions depending on the number of Ethernet ports. There is also a special concierge version. It is possible to visualise KNX projects by plans or by rooms (fully editable and configurable by the user), and it also supports scenarios, yearly timings, technical alarms and push notifications as well as scripting support for advanced programmers.
Qubik-doory is an intelligent numeric KNX keypad for access control. It’s a glass touch device, backlit and equipped with a proximity sensor. It’s dedicated to the hospitality market as it provides as standard the functions “Do not disturb” and “Make up room”. Black or white, horizontal or vertical, it supports 1000 different codes on board. It allows room access management via a numeric code without the need for a key or magnetic card. Combined with Qubik-doory, a glass KNX touch panel is to be installed inside the room, for the activation of functions and in direct communication with hotel reception.
B.E.G. presents a new KNX generation solution that provides interesting innovations in addition to the proven functions of the previous models. The new KNX multi-sensor can record and transmit no less than nine parameters to the KNX bus. Ideal for where many people share the same room, it shares the room climate details to ensure a safe and healthy work environment. The PD2N-KNXs-OCCULOG®-DX is our multi-talented solution for building automation. The ceiling sensor also measures air quality, humidity and is also a temperature controller.
Elegant and refined. The compactness that adapts to your style. Available in 3 colours: black, silver and brown. Resolution of 480 x 480; Display 10 pages; Integrated multifunction including dimming, switch, scene, curtain, air conditioning; Support text, icon, layout; Text support customisation and built-in temperature and humidity sensor; Support laser function and human body sensing; High-grade aluminium frame; Dimensions: 85 x 95 x 36mm.
Cascoda’s KNX IoT Development Kit provides everything you need to drive digital transformation & services from your KNX technology. The Development Kit features a KNX IoT router, integrating Thread, PoE, Ethernet & Wi-Fi connectivity, and a KNX IoT Development Board. The Development Board adds Cascoda’s certified Thread module, ultra-low-power modes, programmable buttons & LEDs, E-Paper display integration and a library of sensor & actuator plug-in boards, to develop your KNX IoT solution. Cascoda, as the developer of the open-source KNX IoT stack & with 12 years of industry-leading knowledge in digital transformation, is here to help you all the way to production & beyond.
ComfortClick’s Jigsaw multiprotocol KNX server now comes with new features. With the latest update, Jigsaw enables remote KNX programming via ComfortClick cloud. It now also supports HomeKit, which means integration with any HomeKit device and the use of Siri for voice control are possible. All the previously supported systems are also still there: BACnet, Modbus, MQTT, Google Assistant, Amazon Alexa, Sonos, Denon, Philips Hue, IP cameras, TCP/IP devices, etc. ComfortClick enables the design of a custom user interface, logical operations, scenes, and schedules.
DINUY launches a new and innovative multifunction actuator, IR KNT 044, which incorporates on/off, shutter and fan coil channels as well as dimming channels. Besides the 4 switching channels, this new device incorporates up to 4 dimming channels for LED strips, which can be configured as 4 independent channels or 1 RGBW channel. In addition, it incorporates up to 12 analog/binary Inputs, with the chance of lengthening the cable of the binary inputs up to 200m. The keypad allows every single output to be controlled manually. It also includes 8 binary logic functions, central control, 4 heating/cooling thermostats. This new actuator has been designed to be installed in residential buildings, offices or hotel rooms.
IKON SERVER is the ultimate multiprotocol web server for connected buildings, with native support for KNX. Control your building with apps and web browser, locally or remotely, with free and unlimited cloud remote access, or by voice, thanks to native integration with Alexa and Google Assistant. Import ETS projects and easily create graphical pages, scenes, schedules, notifications, maths operations and advanced logic functions with the integrated LUA engine (both scripting and graphical editor supported). Monitor the energy consumption and log history trends of any entity, both locally and on the cloud, and generate flexible data analysis reports. 100% made in Italy by Domotica Labs!
Rosa Thermostats and Switches has 7000 series 4mm aluminum or tempered glass material options. Device is touch operated and has frameless design. Beside limitless color option for glass option, white, anthrachite, natural aluminium, bronz and gold colors are available for metal option.
In order to complete the range, Rosa products has same color and material options for frames which is suitable for BS, EU and modular standards. Up to 8 buttons available for switches, up to 6 button available for thermostats. Short press / long press functions are available for each of the buttons. Also, web configurator allows system integrators to configure the icons and texts of product easily.
There are feedback LEDs on edges and navigation LED on the bottom of the device. Built-in temperature sensor on thermostats and switches makes it possible to control heating-cooling systems. Secondary heating / cooling control system can also be controlled via the same device. LCD of thermostat is able to show ambient temperature, set point temperature, fan speed, seasonal modes (summer / winter) and comfort / night / away / stay modes.
The EK-EV2-TP “virtual” push-button. The 2.65” IPS RGB borderless display with haptic feedback can be configured to manage up to 12 buttons, thermostat functions with an integrated sensor and an audio control page. Each button can be customised after installation via a dedicated mobile Bluetooth application. The proximity sensor integrated into the front panel (to be ordered separately) provides visual comfort at night. Configuration and commissioning of the devices are carried out using the ETS® software and Bluetooth mobile application.
Cala KNX IL is a coloured light for installation in standard 55mm switch ranges. The light field of the flat device lights up green, yellow or red. This can be used to display the room occupancy, for example, or to visualise other messages and warnings. When switched off, the glass surface in the switch frame integrates unobtrusively into the interior. A special area of application is the display of room air quality. For this purpose, the Cala KNX IL CO2 indicator light is available with an integrated sensor that switches the light field from green to yellow to red depending on the CO2 value.
EmCom KNX Presence Detectors bring energy saving and automatic lighting control to KNX Building and Home Control System with ease and comfort. Wide Range Presence Detector covers a 360° detection range up to diameter 24 meters; High Bay Presence Detector well meets the requirement of 15 meter installation height; and Corridor Presence Detector takes care of a 40×5 meter aisle detection range. The whole product lineup is available for intelligent lighting management, offering superior energy efficiency and living comfort.
ATMO presence detectors for KNX from ESYLUX have a multi-sensor that enables them to control lighting in addition to air conditioning, ventilation and heating depending on demand, thereby ensuring energy efficiency. A new variant of the highest configuration level now offers even easier installation: The VOC sensor provides improved air quality while requiring only an additional 30 volts of DC power. Simply supply the voltage using the AUX output of a KNX power supply and two free wires of the KNX cable.
KNX fan coil actuators by GEWISS, together with Thermo ICE KNX thermostats, ensure comfort and energy savings in any environment, from office to residential. Also remotely, with the Smart Gateway app. KNX fan coil actuators manage 2- and 4-pipe heating/cooling systems and can control 0-10V proportional valves, 2- or 3-point valves and fans with 0-10V proportional output or up to 3 speed levels. They manage the system independently thanks to the built-in regulator – room thermostat function – or with external control, are equipped with inputs for monitoring condensation, window contact or the temperature sensor, and an additional relay that can be used as a switching output.
GVS KNX Button Smart 3-gang with display is a cost-effective, multi-functional smart panel that combines pushbuttons and display and offers a wide variety of KNX functions. Small in size but with huge functionality. For push-button control, it supports up to 3 pages, with 4 buttons per page of full KNX functions including switching, dimming, RGB & RGBW control, shutter/blind control, scene control, value sending, shift register, multiple operation, 8 group event and 8 logic functions. For thermostats, it supports air conditioning control (fan coil & VRF), underfloor heating and ventilation. In addition, the device also supports background music control with lyrics display.
Granite 4.3'' is a high-end and multi-function control panel for home automation. With 4.3-inch LCD screen and full-screen touch control, it is convenient for the users to control devices of lighting, curtain, scene, AC/FCU, floor heating, music and fresh air in an intuitive way.
Landscape and portrait modes: Installed for use from multiple perspectives.
For more details, please visit www.hdlautomation.com/product100000272672778.html
IN701-KNX is the new platform concept for Intesis protocol translators. This concept allows you to combine multiple protocols in one hardware platform and select the ideal application for your KNX project using Intesis MAPS.
Exchangeable Protocol Translation combinations. User-friendly configuration: connect and select your desired application using Intesis MAPS. Multiple Serial and IP ports for KNX TP, BACnet MS/TP&IP, Modbus RTU&TCP and ASCII Serial&IP. Certification: Certificated for the main protocols in building automation. One hardware series, multiple applications.
ntesis® 700 series for protocol translation, a new concept that breaks the old reliance between hardware and software. This concept allows you to combine multiple protocols in one hardware platform and select the application for your project using MAPS. The process is called late configuration. This gateway has communication interfaces compatible with KNX, BACnet, Modbus, and ASCII, allowing you to choose the combination later in the configuration phase. The available options are KNX - Modbus Server, Modbus-KNX client, KNX - BACnet server, BACnet - KNX client, and KNX - ASCII server, offering versions depending on the number of variables/points to be integrated, supporting from 100 up to 3000 points.
Ilevia X1 is the server for local and remote management and control via mobile and desktop devices of KNX-based smart installations such as villas, apartments, hotels, offices and factories. Thanks to a new software version with a renewed ETS project import tool, the Ilevia solution absolutely reconfirms itself as the fastest system in the world for creating visualisation for KNX systems. What makes the Ilevia system unique is the total lack of limitations for the management of KNX group addresses. Ilevia also supports KNX Secure. In addition, all previously supported systems are still present: Google Assistant, Amazon Alexa, Philips Hue, Shelly, Satel, Tecnoalarm, Inim Electronics alarms, Dahua, Ganz, IP cameras, IRTrans and TCP/IP devices, Vivaldi, Onkyo Pioneer, Samsung, Denon multimedia systems.
What is the main difference between using the ETS Remote online service and VPN or port forwarding? No need to spend time setting up - it starts in a few clicks. KNX equipment will not be hacked - the connection is secure. The licence to use the online service can be included in the bill to the client. An important condition for using ETS Remote is the presence of an iRidium Server UMC with TP1 in the project. Simple, easy and efficient.
The new update for the SMART CONNECT KNX e-charge II integrates more manufacturers! Even more diversity! With the new update V1.3 the SMART CONNECT KNX e-charge II supports the integration of additional manufacturers of charging points. From now on, charging points of the companies Schneider Electric (EVlink Wallbox G4 Smart) as well as Schrack Technik (i CHARGE CION) can be integrated conveniently and quickly into the KNX. The manufacturer ABB has added another model (Terra AC) with this update. Another new feature is the support for external electricity meters at charging points which are not equipped with an integrated electricity meter. The device can be updated using the integrated function on the device web page. The update is free of charge. Please have a look at our SMART CONNECT KNX e-charge II product website. There you will find the new database entry in the download area.
Do you have an old KNX/EIB installation that is to be connected to the internet and doubt whether it is secure against hacker attacks? Conversion to KNX Data Secure or IP Secure is out of the question for cost reasons? With the new Lingg&Janke push-button interface 4 fold Secure this is no longer a problem! Because when its programming lock is activated, neither download nor upload can take place on this KNX line. Any access to a KNX device, no matter how old, is reliably prevented. One such pushbutton interface per line segment protects the system. TS4FL-2-PS-SEC programming lock 79883SEC.
The KAA-4R4V-S dimming actuator is a 4-channel device with high-quality, independent latching relays. A DC 0(1)-10V signal is used to perform the dimming on the connected LED driver at each channel. The dimming curve can be adjusted to the linear or logarithmic mode, which is suitable for all kinds of luminaires and used with sensors or input devices in buildings. The dimmer is powered via KNX, so it doesn’t require any additional power supply. KNX Dara Secure is equipped, supporting and offering protection against manipulation in building automation. Furthermore, KAA-4R4V-S relays support shutter/blind control, provides flexibility in building planning. Compact design with 4 units (72mm) wide makes it suitable for quick and simple installation.
The NETx Multi Protocol Server is a software solution that allows you to connect your KNX project to other systems and technologies. In addition to various field-level interfaces (e.g. Modbus, BACnet, SNMP), hotel management systems (Fidelio/Opera, Protel, Infor, CharPMS) and access control systems (VingCard, Kaba, Salto) are supported too. Using the built-in logic engine (LUA scripts and/or graphical functional block programming), missing control functions can be implemented. The NETx Multi Protocol Server is also an OPC DA and OPC UA as well as a certified BACnet/IP server. Various web services and IoT interfaces like KNX WS, oBIX and MQTT are provided too.
PEAKnx has released update 4.4 of the KNX visualisation software YOUVI and presents 5 innovations: via the energy monitoring widget, energy flows can be tracked live and can be viewed by residents at any time. The widget shows power fed into or taken from the grid, self-generated power from the photovoltaic system or power currents in the house battery and vehicle. Furthermore, KNX ventilation systems can now be integrated. Offline voice control with ProKNX Aragon and the control of IKEA Tradfri devices is also now possible. For system integrators, the update offers the new project editor. With it, projects can be efficiently checked and post-edited after the ETS import.
ARAGON combines privacy, security and interoperability, making it the ideal complement for the sophisticated home. What’s said at home, stays at home. Speech recognition works entirely on the device without a connection to the cloud. The IoT functionalities also provide unprecedented compatibility with IP network devices. These can even be integrated into the KNX installation, and thus evaluated, operated or queried. From the LED lamp to the motion detector and the TV, ARAGON is the link between KNX and the intranet. The support of the new KNX IoT 3rd party standard now additionally enables voice operation of many KNX serv-ers without any configuration.
Alongside the existing professional line of servers, Thinknx introduces Trendline devices. The perfect entry-level solution born to meet the needs of different scenarios such as residential buildings, small apartments or the hospitality sector. A simple configuration and the advantage of being fully customisable by the end-user including favourite pages and intuitive widgets make the Trendline a key to smart automation. It consists of three devices: K, K2 and Piccolo. The first two embed stand-alone servers to control the KNX plant. The Piccolo instead operates just as a client. Temperature and humidity sensors enable all of them to be used as a thermostat.
The SpaceLogic KNX IP 7 Inch Touch Panel is a 7 inch touch screen with a horizontal or vertical orientation. The touch panel offers a wide range of functions to control your installation. The touch panel is equipped with an embedded application making configuration easy and fast. The solution is designed to work with Wiser for KNX and spaceLYnk logic controllers. This touch panel exists in a black version (reference = MTN6260_7760) and a white version (reference = MTN6260_7770). The Wi-Fi connectivity makes the installation of the touch panel easier and also provides freedom in terms of the installation location.
The SpaceLogic KNX 4” Touch Unit combines the functionality of a thermostat and a multi-functional pushbutton with the intuitive operation of a smartphone or tablet: the screen is made of glass for a natural feel and robustness. The Touch Unit lets you select up to nine windows for the main menu and up to six functions per window. You can also personalise the device’s screensaver and background image. An in-built proximity sensor wakes the screen up when it detects your presence. Create the perfect ambience at home: adjust the light colour, temperature, and brightness, close the blinds, change the room temperature, and play your favourite music – all within one smart interface.
The new thermal drive actuators are used to control electrothermal actuators for heating and cooling systems. They have six valve outputs and six internal room temperature controllers (N 605D41) or two valve outputs and two internal room temperature controllers (modular device RL 605D23) in a single device, which contributes to simple and, in particular, cost-effective temperature control. Like all KNX rail-mounted devices, they feature a harmonised device concept, maintenance-free terminals, test contacts and an easy-to-use direct front panel with status LEDs on the front of the device. They can be installed centrally or decentralised and therefore offer maximum installation flexibility.
For the first time, the KNX Community could also vote on their favorite new KNX Product, with the Touch Control TC5 as a clear winner. The new KNX Touch Control TC5 unites elegant and modern design with intuitive operation and extensive customization options in a 5’’ touch panel. The elegant combination of high-quality aluminum and glass panel together with the sophisticated and slim design make the TC5 the perfect match for any room situation. But the TC5 comes with more than just good looks: an integrated temperature sensor and the huge range of KNX room control applications provide users with exactly the options they need to create optimum room conditions. The password-protected device uses embedded proximity sensors for automatic screen activation or deactivation and an LED indication bar as orientation light and to inform about alarms or when the device is in KNX programming mode.
G-BOX is a gateway for transferring data acquired in the field from EQUOBOX RTUEVO1T (SIN.EQRTUEVO1T) and ALFA metering systems to KNX / Modbus. It allows the integration via standard field bus of metering/energy consumption data, necessary to allow access to SUPER BONUS 110 to home/building automation as a trailed intervention. The device for DIN rail installation is equipped with a web interface that can be consulted locally and/or remotely. Through the latter, it is possible to configure the device. The user can carry out the configuration quickly and easily without necessarily having to know any functional details concerning the metering system or ALFA.
JEMA is a Japanese electric standard established about 25 years ago, and although it is widely used in Japanese equipment, it is still not well-known overseas. Therefore, there was no KNX device compatible with JEMA in the past. However, JEMA was used in many projects related to SUMAMO, and in order to eliminate the inconvenience of connection and wiring, we decided to develop a gateway between KNX and the JEMA standard. JEMA terminals are installed on various Japanese devices such as air conditioners, floor heaters, electric locks, boilers, shutters, and intercoms that can be found in every home.
The latest version of the IP Secure Router MECip-Sec supports the Segment Coupler extension and is already available as an OEM product. As announced in the presentation of the ETS6, KNX projects can be set up in a much more simple and free manner – when segment couplers are used together with the new ETS software. In particular, now you can add segments with filtering and to assign addresses to routers and couplers with greater flexibility. The advantage is that projects that consist of numerous separate sections can be planned and realised. In particular, the MECip-Sec is ideal for easily connecting a large number of TP sections via IP.
In addition to comfort and energy efficiency, air quality is also an important topic in smart homes. For this purpose, the smart switch solo+ offers a high-grade air quality sensor. It records the entire room climate with volatile organic compounds (VOCs), room temperature, relative humidity and air pressure. solo+ fits into two standard flush-mounted boxes and can be configured via ETS. It enables intuitive control of all functions in a room - such as light, shade, climate, entertainment or access control. Whether in a smart home, office, hotel room or conference room – thanks to the optional flush-mount housing, installation flush with the wall is possible.
As a Belgian designer and manufacturer of elegant design switches, room controllers with OLED display and motion detectors, we are constantly looking for innovating opportunities. Our newest KNX product is a new state-of-the-art switch, and is two-fold. It contains the Serenity and the Velocity. The Serenity and the Velocity are mechanical switches with 1, 2 or 4 buttons with a click feedback and can also be operated by a single, double or multi-click. These switches are available in all kinds of metal materials and are ideal for customisations such as engraving, lasering or printing. These are all hand-made products, hence making every switch unique.
The new range of DT multi-sensors are an extension to Vestamatic’s well-known line of shading motors, controls and sensors. The KNX Multi-Sensor creates comfort and well-being by precisely adjusting the indoor climate. Presence-dependent control of lighting systems, temperature, acoustics, humidity, and air quality automated by hygienic, contactless control. Installed surface-moun-ted, recessed, or flush-mounted with the ceiling, the sensor detects 360° with a 10m range at a 2.8m mounting height. An additional acoustic sensor provides optimal, expandable area coverage.
Thanks to a minimum thickness, the new KNX Linea switches offer an absolute planarity between the decorative plate and the pushbuttons: a slight thickness of only 5.7mm, RGB backlight with a wide range of customisable icons and a silk effect obtained from a special manufacturing process make these keypads unique in the market. The range includes versions with 4 or 6 buttons, with or without actuator for lights or shutters. It is possible to obtain a total look in black, white and canvas finishes or combine the pushbuttons with metal plates or with glass effect thanks to the reflex finish. For every taste and style.
Interra Daikin Sky AC - KNX Gateway is an air conditioner gateway used for monitoring and controlling all the functioning parameters of Daikin Industries air conditioners via the KNX bus line. It provides complete bidirectional integration to Daikin Sky & VRV air conditioners. It includes 4 logical advanced parameters - each logical parameter has up to 4 inputs and can be configured as AND, OR & XOR - and 8 advanced converter parameters. Logic and converter parameters can be used for energy savings, configurable scenes, temperature limits, etc. It also provides error notifications.
Interra KNX Universal Dimmer can generate 250W output power from each channel and drive R, L, and C loads. It has temperature protection, short circuit protection, error notification with channel LEDs, load presence detection and load type detection. Main features: Automatic load recognition based on ETS configurations. Incandescent lamps, low voltage and high voltage halogen lamps. Ability to control dimmable LED retrofit lamps and dimmable compact fluorescent lamps. Dividing the dimming curve into 5 zones and adjusting the dimming speed of each zone separately.
Interra Daikin Sky AC - KNX Gateway is an air conditioner gateway used for monitoring and controlling all the functioning parameters of Daikin Industries air conditioners via the KNX bus line.
ITR830-0003 is compatible with models in Sky & VRV types categorized in the compatibility list and provide complete bidirectional integration. Daikin Sky & VRV AC - KNX Gateway has an easy installation feature and can be installed inside the own AC indoor unit or a proper location away from the air conditioner, it connects one side directly to the electronic circuit of the AC indoor unit and in the other side directly to the KNX bus.
It includes 4 logical advanced parameters, each logical parameter has up to 4 inputs and can be configured as AND, OR & XOR and 8 advanced converter parameters, each converter has four operations math calculations according to the input type.
Logic and converter parameters can be used for energy savings, configurable scenes, temperature limits etc. and it provides error notifications for errors that may occur in exceptional cases.
Interra KNX Universal Dimming Actuators with or without Inputs can generate 250W of output power from each channel and drive R, L, and C loads. It has temperature protection, short circuit protection, error notification with channel LEDs, load presence detection, and load type detection. It is possible to program the device without 230 V supply voltage.